continuous current mode meaning in Chinese
不间断电流模式
Examples
- And the design guideline of the circuit parameters in both the discontinuous current mode ( dcm ) and continuous current mode ( ccm ) were given respectively
文中分别给出了反激逆变器断续及连续模式下的电路参数设计准则。 - Hfl inverters in discontinuous current mode ( dcm ) are extended to those in continuous current mode ( ccm ) , which is very important for improving the conversion efficiency . the reason is that the peak current and rms current of power switches can be reduced sharply
本文将工作于dcm方式的单级高频链逆变电路扩宽到ccm工作方式，仿真和试验结果表明ccm模式下流过功率管电流峰值和有效值明显减小，这对提高逆变电路的效率具有重要意义。 - A novel parallel - serial type cttfc ( combined two - transistor forward converter ) with coupled inductor is present in this paper , and the performance of three parallel - serial type cttfcs is studied and compared . the performance of cttfc with coupled inductor is similar to the other two cttfcs while coupling coefficient is less than one and the converter working ccm ( continuous current mode ) , and input - to - output voltage gain increase one times while coupling coefficient is one
本文提出了一种耦合电感并?串型双管正激组合变换器，并对三种并?串型组合变换器的特性作了比较：耦合系数小于1且耦合线圈电流连续时，三种并?串型组合变换器特性相类似：耦合系数为1时，组合变换器输入输出电压增益增大一倍。 - The author of the dissertation pay a lot efforts to focus on designing the dual - loop control circuit based on optimized psm , include : 1 ) . researched the relationship of input and output voltage and output valtage ripple , when psm operate in continuous current mode and discontinuous current mode respectively . what we have done will direct psm apply to converter
本文在psm调制理论的基础上,设计基于优化psm调制模式的双环控制电路,主要包括以下几个方面内容: 1 )对psm调制模式分别在连续和断续工作模式下的输入输出电压关系以及输出电压纹波进行研究,以期指导psm调制模式在变换器中的应用。 - From the view point of the whole topologies of current mode hfl inverters , two topologies of half - bridge and push - pull current mode hfl inverters are proposed , which are composed of four power switches . hfl inverters in discontinuous current mode ( dcm ) are extended to those in continuous current mode ( ccm )
从完善电路拓扑和降低成本的角度出发，本文提出了两种结构的电流源高频链逆变电路，它们分别是由四个功率管组成的半桥和推挽双向电流源高频链单级逆变电路，并将工作在电感电流断续模式的逆变电路扩展到电感电流连续模式。